．原料研磨條件 Material requirement *進料大小:直徑10mm以下 *Inlet size: Dia.under 10mm *硬度: 建議小於莫氏硬度7 *Hardness: Under Morhs 7 for reference *產品顆粒大小:d97=40~75μm (238~350 mesh) *Product size range: d97=40~75μm (350~238 mesh)

■碳酸鈣鹽 Calcium carbonate 石灰石 大理石 方解石 白雲石 Limestone Marble Calcite Dolomite ■水泥材料 Ceramic Materials 長石 石英 陶瓷黏土 Feldspar Quartz Kaolin clay ■工業用礦石 Industrial Minerals 重晶石 火山黏土 煤炭 焦炭 石墨 石膏 磷酸鹽石 熟石灰石 滑石 沸石 Barite Bentonite Coal Cokes Graphite Gypsum Rock phosphate Slaked lime Talc Zeolite

	申川獨特設計 特殊襯板設計能有效利用球磨機性能及減輕襯板重量降低動力需求，並且材質有高鉻、高錳或陶瓷規格滿足客戶的需求(見Fig.1) 根據物料性質來製作設計襯板溝槽(見Fig.1)，使物料更有效率在球磨機內研磨 強壯齒輪及本體設計能適用於各種環境條件 中間篩板設計(見Fig.3)能防止卡料及分隔兩室原料能有效率研磨，延長粗料研磨時間 根據機型大小提供皮帶或齒輪箱傳動方式 整臺球磨機負壓設計能防止粉塵外洩汙染 進出料採內部螺旋設計，防止堵料 (見Fig.2) Soon Strong unique design Special liner design for up the efficiency of ball mill and reduce weight to low down the power use. The liner material could be high Cr,、Mn or ceramic for satisfied customer needs (See Fig.1) Design & manufacture the liner cannelure to fit the material property. Let the material be more efficiency in milling Robust gear ring and main body to fit any situation use. Middle screen (See Fig.3) design could avoid material jam and separate two chamber to keep material in best efficiency. Extend the coarse material mill time. Belt or gear box transmission choice by ball mill size Whole ball mill is in negative pressure design that prevent dust pollution Inlet & outlet adapted inner screw design to keep away material jam (See Fig.2)